Stencil Wiping Rolls

DEK Stencil Rolls Aquavator™ – 300mm

DEK Stencil Rolls Aquavator™ – 300mm

NOVATECHTM 4000 fabric used in AQUAVATORTM DEK stencil wiping rolls products is comprised of a synergistic blend of virgin rayon and polyester fibers.  Between these fibers is a water-active cleaning agent that will loosen and clean solder paste effectively from the bottom of stencils. These fibers are bonded with a proprietary polymeric resin.  Examination under a microscope shows the unique bonding characteristics of this super tough resin at the intersection of each fiber and is conducive to its low lint qualities. Looking at the cleaning surface under a microscope, it is evident that the irregular surface is conducive to the collection and entrapment of contamination.  While other smoother products simply push and smear, NOVATECHTM 4000 aggressively wipes, scoops and contains contamination.  As for its absorbency rate, NOVATECHTM 4000 readily accepts aqueous, alcohol and solvent based cleaning solutions. Because rayon is naturally absorbent, no soaps or surfactants that might leach out are added.  NOVATECHTM 4000 fabric is antistatic and the core is made of high impact pvc. The anti static properties decrease the threat of static sparks that may cause hazardous fires in the presence of flammable solvents.  These anti static properties also decrease the static attraction of dust and other contaminants and decreases the chance of static discharge onto solder traces and components on circuit boards.

Specifications:
Item: DEK Stencil Wiping Roll
Quantity/Case: 25
Material Width: 300 mm
Core Width: 530 mm
Material Length: 32′
Sold by: Roll
Item #: D-NT4-1.300

FOR DEK 268 AND DEK 288 PRINTERS

*Product is priced by the roll but must order by the case*

Quantity
Price: $25.00
Loading Updating cart…

DEK Stencil Rolls Aquavator™ – 400mm

DEK Stencil Rolls Aquavator™ – 400mm

NOVATECHTM 4000 fabric used in AQUAVATORTM DEK stencil wiping rolls products is comprised of a synergistic blend of virgin rayon and polyester fibers.  Between these fibers is a water-active cleaning agent that will loosen and clean solder paste effectively from the bottom of stencils. These fibers are bonded with a proprietary polymeric resin.  Examination under a microscope shows the unique bonding characteristics of this super tough resin at the intersection of each fiber and is conducive to its low lint qualities. Looking at the cleaning surface under a microscope, it is evident that the irregular surface is conducive to the collection and entrapment of contamination.  While other smoother products simply push and smear, NOVATECHTM 4000 aggressively wipes, scoops and contains contamination.  As for its absorbency rate, NOVATECHTM 4000 readily accepts aqueous, alcohol and solvent based cleaning solutions. Because rayon is naturally absorbent, no soaps or surfactants that might leach out are added.  NOVATECHTM 4000 fabric is antistatic and the core is made of high impact pvc. The anti static properties decrease the threat of static sparks that may cause hazardous fires in the presence of flammable solvents.  These anti static properties also decrease the static attraction of dust and other contaminants and decreases the chance of static discharge onto solder traces and components on circuit boards.

Specifications:
Item: DEK Stencil Wiping Roll
Quantity/Case: 25
Material Width: 400 mm
Core Width: 530 mm
Material Length: 32′
Sold by: Roll
Item #: D-NT4-1.400

FOR DEK 268 AND DEK 288 PRINTERS

*Product is priced by the roll but must order by the case*

Quantity
Price: $28.00
Loading Updating cart…

DEK Stencil Rolls Aquavator™ – 515mm

DEK Stencil Rolls Aquavator™ – 515mm

NOVATECHTM 4000 fabric used in AQUAVATORTM DEK stencil wiping rolls products is comprised of a synergistic blend of virgin rayon and polyester fibers.  Between these fibers is a water-active cleaning agent that will loosen and clean solder paste effectively from the bottom of stencils. These fibers are bonded with a proprietary polymeric resin.  Examination under a microscope shows the unique bonding characteristics of this super tough resin at the intersection of each fiber and is conducive to its low lint qualities. Looking at the cleaning surface under a microscope, it is evident that the irregular surface is conducive to the collection and entrapment of contamination.  While other smoother products simply push and smear, NOVATECHTM 4000 aggressively wipes, scoops and contains contamination.  As for its absorbency rate, NOVATECHTM 4000 readily accepts aqueous, alcohol and solvent based cleaning solutions. Because rayon is naturally absorbent, no soaps or surfactants that might leach out are added.  NOVATECHTM 4000 fabric is antistatic and the core is made of high impact pvc. The anti static properties decrease the threat of static sparks that may cause hazardous fires in the presence of flammable solvents.  These anti static properties also decrease the static attraction of dust and other contaminants and decreases the chance of static discharge onto solder traces and components on circuit boards.

Specifications:
Item: DEK Stencil Wiping Roll
Quantity/Case: 25
Material Width: 515 mm
Core Width: 530 mm
Material Length: 32′
Sold by: Roll
Item #: D-NT4-1

FOR DEK 268 AND DEK 288 PRINTERS

*Product is priced by the roll but must order by the case*

Quantity
Price: $30.00
Loading Updating cart…

DEK Stencil Wiping Roll – 300mm

DEK Stencil Wiping Roll – 300mm

NOVA-TECHTM 1000 DEK cellulose stencil roll is an especially effective wipe. It is tough, abrasion resistant, absorbent, and virtually free of particle generation. It is comprised of a synergistic blend of virgin polyester and cellulose that is hydroentangled into a uniform, super-tough fabric. These unique features give NOVA-TECHTM 1000 DEK cellulose stencil roll a high degree of absorbency and effectiveness during the process of general wiping.


Specifications:

Item: DEK Stencil Wiping Roll
Quantity/Case: 25
Material Width: 300mm
Core Width: 530mm
Material Length: 32′
Sold by: Roll
Item #: D-NT1-1.300

FOR DEK 268 AND DEK 288 PRINTERS

*Product is priced by the roll but must order by the case*

Quantity
Price: $14.17
Loading Updating cart…

DEK Stencil Wiping Roll – 400mm

DEK Stencil Wiping Roll – 400mm

NOVA-TECHTM 1000 DEK cellulose stencil roll is an especially effective wipe. It is tough, abrasion resistant, absorbent, and virtually free of particle generation. It is comprised of a synergistic blend of virgin polyester and cellulose that is hydroentangled into a uniform, super-tough fabric. These unique features give NOVA-TECHTM 1000 DEK cellulose stencil roll a high degree of absorbency and effectiveness during the process of general wiping.


Specifications:

Item: DEK Stencil Wiping Roll
Quantity/Case: 25
Material Width: 400mm
Core Width: 530mm
Material Length: 32′
Sold by: Roll
Item #: D-NT1-1.400

FOR DEK 268 AND DEK 288 PRINTERS

*Product is priced by the roll but must order by the case*

Quantity
Price: $15.00
Loading Updating cart…

DEK Stencil Wiping Roll – 515mm

DEK Stencil Wiping Roll – 515mm

NOVA-TECHTM 1000 DEK cellulose stencil roll is an especially effective wipe. It is tough, abrasion resistant, absorbent, and virtually free of particle generation. It is comprised of a synergistic blend of virgin polyester and cellulose that is hydroentangled into a uniform, super-tough fabric. These unique features give NOVA-TECHTM 1000 DEK cellulose stencil roll a high degree of absorbency and effectiveness during the process of general wiping.


Specifications:

Item: DEK Stencil Wiping Roll
Quantity/Case: 25
Material Width: 515mm
Core Width: 530mm
Material Length: 32′
Sold by: Roll
Item #: D-NT1-1

FOR DEK 268 AND DEK 288 PRINTERS

*Product is priced by the roll but must order by the case*

Quantity
Price: $16.67
Loading Updating cart…

DEK Stencil Wiping Roll Green Monster XL™- 300mm

DEK Stencil Wiping Roll Green Monster XL™- 300mm

Patent pending NOVATECHTM 3000 XL fabric used in the GREEN MONSTERTM DEK stencil wiping rolls product line is like no other product and is comprised of a synergistic blend of virgin rayon and polyester fibers bonded with a tough proprietary polymeric resin. This fabric is densified so that more feet can be supplied per roll. Fewer roll changes offer far less downtime and enormous cost savings. Magnification shows the fabric to have a fiber structure with many open voids for aggressive collection of solder paste and adhesives on a “micro” level. This aggressive fabric has the porosity required to maximize the use of vacuum systems. Unlike other smooth paper-like products that simply push and smear and don’t allow adequate air to pass through.

The anti static properties decrease the chance of a static discharge onto solder traces and components – especially when printing the other side of loaded boards.  These anti static properties also decrease the static attraction of dust and other contaminants.

Specifications:
Item: DEK Stencil Wiping Roll
Quantity/Case: 25
Material Width: 300 mm
Core Width: 530 mm
Material Length: Approx 50′
Sold by: Roll
Item #: D-NT3-1.300

FOR DEK 268 AND DEK 288 PRINTERS

Compare to:

DEK JNJ Easybraid Microcare
176217  n/a n/a  n/a

*Product is priced by the roll but must order by the case*

Quantity
Price: $21.67
Loading Updating cart…

DEK Stencil Wiping Roll Green Monster XL™- 400mm

DEK Stencil Wiping Roll Green Monster XL™- 400mm

Patent pending NOVATECHTM 3000 XL fabric used in the GREEN MONSTERTM DEK stencil wiping rolls product line is like no other product and is comprised of a synergistic blend of virgin rayon and polyester fibers bonded with a tough proprietary polymeric resin. This fabric is densified so that more feet can be supplied per roll. Fewer roll changes offer far less downtime and enormous cost savings. Magnification shows the fabric to have a fiber structure with many open voids for aggressive collection of solder paste and adhesives on a “micro” level. This aggressive fabric has the porosity required to maximize the use of vacuum systems. Unlike other smooth paper-like products that simply push and smear and don’t allow adequate air to pass through.

The anti static properties decrease the chance of a static discharge onto solder traces and components – especially when printing the other side of loaded boards.  These anti static properties also decrease the static attraction of dust and other contaminants.

Specifications:
Item: DEK Stencil Wiping Roll
Quantity/Case: 25
Material Width: 400 mm
Core Width: 530 mm
Material Length: Approx 50′
Sold by: Roll
Item #: D-NT3-1.400

FOR DEK 268 AND DEK 288 PRINTERS

Compare to:

DEK JNJ Easybraid Microcare
176216 n/a EB41D2120 n/a

*Product is priced by the roll but must order by the case*

Quantity
Price: $23.33
Loading Updating cart…

DEK Stencil Wiping Roll Green Monster XL™- 515mm

DEK Stencil Wiping Roll Green Monster XL™- 515mm

Patent pending NOVATECHTM 3000 XL fabric used in the GREEN MONSTERTM DEK stencil wiping rolls product line is like no other product and is comprised of a synergistic blend of virgin rayon and polyester fibers bonded with a tough proprietary polymeric resin. This fabric is densified so that more feet can be supplied per roll. Fewer roll changes offer far less downtime and enormous cost savings. Magnification shows the fabric to have a fiber structure with many open voids for aggressive collection of solder paste and adhesives on a “micro” level. This aggressive fabric has the porosity required to maximize the use of vacuum systems. Unlike other smooth paper-like products that simply push and smear and don’t allow adequate air to pass through.

The anti static properties decrease the chance of a static discharge onto solder traces and components – especially when printing the other side of loaded boards.  These anti static properties also decrease the static attraction of dust and other contaminants.

Specifications:
Item: DEK Stencil Wiping Roll
Quantity/Case: 25
Material Width: 515 mm
Core Width: 530 mm
Material Length: Approx 50′
Sold by: Roll
Item #: D-NT3-1

FOR DEK 268 AND DEK 288 PRINTERS

Compare to:

DEK JNJ Easybraid Microcare
176215 4202DK-45 n/a n/a

*Product is priced by the roll but must order by the case*

Quantity
Price: $25.00
Loading Updating cart…

DEK Stencil Wiping Roll Green Monster™- 300mm

DEK Stencil Wiping Roll Green Monster™- 300mm

Patent pending NOVATECHTM 7000 fabric used in the GREEN MONSTERTM DEK stencil wiping rolls product line is like no other product and is comprised of a synergistic blend of virgin rayon and polyester fibers bonded with a tough proprietary polymeric resin.  Magnification shows the fabric to have a fiber structure with many open voids for aggressive collection of solder paste and adhesives on a “micro” level. This aggressive fabric has the porosity required to maximize the use of vacuum systems. Unlike other smooth paper-like products that simply push and smear and don’t allow adequate air to pass through.

The anti static properties decrease the chance of a static discharge onto solder traces and components – especially when printing the other side of loaded boards.  These anti static properties also decrease the static attraction of dust and other contaminants.

Specifications:
Item: DEK Stencil Wiping Roll
Quantity/Case: 25
Material Width: 300 mm
Core Width: 530 mm
Material Length: 32′
Sold by: Roll
Item #: D-NT7-1.300

FOR DEK 268 AND DEK 288 PRINTERS

Compare to:

DEK JNJ Easybraid Microcare
176217 4202DK-12 n/a n/a

*Product is priced by the roll but must order by the case*

Quantity
Price: $19.00
Loading Updating cart…

DEK Stencil Wiping Roll Green Monster™- 400mm

DEK Stencil Wiping Roll Green Monster™- 400mm

Patent pending NOVATECHTM 7000 fabric used in the GREEN MONSTERTM DEK stencil wiping rolls product line is like no other product and is comprised of a synergistic blend of virgin rayon and polyester fibers bonded with a tough proprietary polymeric resin.  Magnification shows the fabric to have a fiber structure with many open voids for aggressive collection of solder paste and adhesives on a “micro” level. This aggressive fabric has the porosity required to maximize the use of vacuum systems. Unlike other smooth paper-like products that simply push and smear and don’t allow adequate air to pass through.

The anti static properties decrease the chance of a static discharge onto solder traces and components – especially when printing the other side of loaded boards.  These anti static properties also decrease the static attraction of dust and other contaminants.

Specifications:
Item: DEK Stencil Wiping Roll
Quantity/Case: 25
Material Width: 400 mm
Core Width: 530 mm
Material Length: 32′
Sold by: Roll
Item #: D-NT7-1.400

FOR DEK 268 AND DEK 288 PRINTERS

Compare to:

DEK JNJ Easybraid Microcare
176216 4202DK-16 n/a n/a

*Product is priced by the roll but must order by the case*

Quantity
Price: $20.00
Loading Updating cart…

DEK Stencil Wiping Roll Green Monster™- 515mm

DEK Stencil Wiping Roll Green Monster™- 515mm

Patent pending NOVATECHTM 7000 fabric used in the GREEN MONSTERTM DEK stencil wiping rolls product line is like no other product and is comprised of a synergistic blend of virgin rayon and polyester fibers bonded with a tough proprietary polymeric resin.  Magnification shows the fabric to have a fiber structure with many open voids for aggressive collection of solder paste and adhesives on a “micro” level. This aggressive fabric has the porosity required to maximize the use of vacuum systems. Unlike other smooth paper-like products that simply push and smear and don’t allow adequate air to pass through.

The anti static properties decrease the chance of a static discharge onto solder traces and components – especially when printing the other side of loaded boards.  These anti static properties also decrease the static attraction of dust and other contaminants.

Specifications:
Item: DEK Stencil Wiping Roll
Quantity/Case: 25
Material Width: 515 mm
Core Width: 530 mm
Material Length: 32′
Sold by: Roll
Item #: D-NT7-1

FOR DEK 268 AND DEK 288 PRINTERS

Compare to:

DEK JNJ Easybraid Microcare
176215 n/a EB41D2120 MCC-105EA

*Product is priced by the roll but must order by the case*

Quantity
Price: $24.00
Loading Updating cart…

DEK Stencil Wiping Roll NOVA-TECH™ 9000 – 300mm

DEK Stencil Wiping Roll NOVA-TECH™ 9000 – 300mm

NOVA-TECHTM 9000 is ESD and an especially effective wiping fabric used in PREMIUM grade stencil wiping rolls.  It is tough, abrasion resistant, absorbent, and virtually free of particle generation.  It is comprised of a synergistic blend of virgin polyester and rayon that is bonded into a uniform, super-tough fabric.  These unique features give NOVA-TECHTM 9000 a high degree of absorbency and effectiveness during the process of wiping stencils.  Unlike no other, it is especially effective in cleaning lead-free solder paste because it has an aggressive cleaning surface and many cavities that can handle the extra “stickiness” of lead-free paste.  This product is also effective when used dry, of course cleaning is always enhanced when wet.

Specifications:
Item: DEK Stencil Wiping Roll
Quantity/Case: 25
Material Width: 300 mm
Core Width: 530 mm
Material Length: 32′
Sold by: Roll
Item #: D-NT9-1.300

FOR DEK 268 AND DEK 288 PRINTERS

*Product is priced by the roll but must order by the case*

Quantity
Price: $20.00
Loading Updating cart…

DEK Stencil Wiping Roll NOVA-TECH™ 9000 – 400mm

DEK Stencil Wiping Roll NOVA-TECH™ 9000 – 400mm

NOVA-TECHTM 9000 is ESD and an especially effective wiping fabric used in PREMIUM grade stencil wiping rolls.  It is tough, abrasion resistant, absorbent, and virtually free of particle generation.  It is comprised of a synergistic blend of virgin polyester and rayon that is bonded into a uniform, super-tough fabric.  These unique features give NOVA-TECHTM 9000 a high degree of absorbency and effectiveness during the process of wiping stencils.  Unlike no other, it is especially effective in cleaning lead-free solder paste because it has an aggressive cleaning surface and many cavities that can handle the extra “stickiness” of lead-free paste.  This product is also effective when used dry, of course cleaning is always enhanced when wet.

Specifications:
Item: DEK Stencil Wiping Roll
Quantity/Case: 25
Material Width: 400 mm
Core Width: 530 mm
Material Length: 32′
Sold by: Roll
Item #: D-NT9-1.400

FOR DEK 268 AND DEK 288 PRINTERS

Quantity
Price: $20.00
Loading Updating cart…

DEK Stencil Wiping Roll NOVA-TECH™ 9000 – 515mm

DEK Stencil Wiping Roll NOVA-TECH™ 9000 – 515mm

NOVA-TECHTM 9000 is ESD and an especially effective wiping fabric used in PREMIUM grade stencil wiping rolls.  It is tough, abrasion resistant, absorbent, and virtually free of particle generation.  It is comprised of a synergistic blend of virgin polyester and rayon that is bonded into a uniform, super-tough fabric.  These unique features give NOVA-TECHTM 9000 a high degree of absorbency and effectiveness during the process of wiping stencils.  Unlike no other, it is especially effective in cleaning lead-free solder paste because it has an aggressive cleaning surface and many cavities that can handle the extra “stickiness” of lead-free paste.  This product is also effective when used dry, of course cleaning is always enhanced when wet.

Specifications:
Item: DEK Stencil Wiping Roll
Quantity/Case: 25
Material Width: 515 mm
Core Width: 530 mm
Material Length: 32′
Sold by: Roll
Item #: D-NT9-1

FOR DEK 268 AND DEK 288 PRINTERS

*Product is priced by the roll but must order by the case*

Quantity
Price: $30.00
Loading Updating cart…

EKRA Stencil Wiping Roll – 500mm

EKRA Stencil Wiping Roll – 500mm

NOVA-TECH TM1000 EKRA cellulose stencil roll is an especially effective wipe. It is tough, abrasion resistant, absorbent, and virtually free of particle generation. It is comprised of a synergistic blend of virgin polyester and cellulose that is hydroentangled into a uniform, super-tough fabric. These unique features give NOVA-TECHTM 1000 EKRA cellulose stencil roll a high degree of absorbency and effectiveness during the process of general wiping.

Specifications:

Item: EKRA Stencil Wiping Roll
Quantity/Case: 25
Material Width: 500mm
Core Width: 500mm
Core ID: 13mm
Material Length: 9m
Sold by: Roll
Item #: E-NT1-500

FOR EKRA E-3, E-4 AND E-5 PRINTERS

*Product is priced by the roll but must order by the case*

Quantity
Price: $18.33
Loading Updating cart…

EKRA Stencil Wiping Roll Aquavator™ – 500mm

EKRA Stencil Wiping Roll Aquavator™ – 500mm

NOVATECHTM 4000 fabric used in AQUAVATORTM EKRA stencil wiping rolls products is comprised of a synergistic blend of virgin rayon and polyester fibers.  Between these fibers is a water-active cleaning agent that will loosen and clean solder paste effectively from the bottom of stencils. These fibers are bonded with a proprietary polymeric resin.  Examination under a microscope shows the unique bonding characteristics of this super tough resin at the intersection of each fiber and is conducive to its low lint qualities. Looking at the cleaning surface under a microscope, it is evident that the irregular surface is conducive to the collection and entrapment of contamination.  While other smoother products simply push and smear, NOVATECHTM 4000 aggressively wipes, scoops and contains contamination.  As for its absorbency rate, NOVATECHTM 4000 readily accepts aqueous, alcohol and solvent based cleaning solutions. Because rayon is naturally absorbent, no soaps or surfactants that might leach out are added.  NOVATECHTM 4000 fabric is antistatic and the core is made of high impact pvc. The anti static properties decrease the threat of static sparks that may cause hazardous fires in the presence of flammable solvents.  These anti static properties also decrease the static attraction of dust and other contaminants and decreases the chance of static discharge onto solder traces and components on circuit boards.

Specifications:
Item: EKRA Stencil Wiper Roll
Quantity/Case: 25
Material Width: 500mm
Core Width: 500mm
Sold by: Roll
Item #: E-NT4-500

FOR E-3, E-4 and E-5 PRINTERS

*Product is priced by the roll but must order by the case*

Quantity
Price: $31.25
Loading Updating cart…

EKRA Stencil Wiping Roll Aquavator™ – 350mm

EKRA Stencil Wiping Roll Aquavator™ – 350mm

NOVATECHTM 4000 fabric used in AQUAVATORTM EKRA stencil wiping rolls products is comprised of a synergistic blend of virgin rayon and polyester fibers.  Between these fibers is a water-active cleaning agent that will loosen and clean solder paste effectively from the bottom of stencils. These fibers are bonded with a proprietary polymeric resin.  Examination under a microscope shows the unique bonding characteristics of this super tough resin at the intersection of each fiber and is conducive to its low lint qualities. Looking at the cleaning surface under a microscope, it is evident that the irregular surface is conducive to the collection and entrapment of contamination.  While other smoother products simply push and smear, NOVATECHTM 4000 aggressively wipes, scoops and contains contamination.  As for its absorbency rate, NOVATECHTM 4000 readily accepts aqueous, alcohol and solvent based cleaning solutions. Because rayon is naturally absorbent, no soaps or surfactants that might leach out are added.  NOVATECHTM 4000 fabric is antistatic and the core is made of high impact pvc. The anti static properties decrease the threat of static sparks that may cause hazardous fires in the presence of flammable solvents.  These anti static properties also decrease the static attraction of dust and other contaminants and decreases the chance of static discharge onto solder traces and components on circuit boards.

Specifications:
Item: EKRA Stencil Wiper Roll
Quantity/Case: 25
Material Width: 350mm
Core Width: 350mm
Sold by: Roll
Item #: E-NT4-350

FOR E-3, E-4 and E-5 PRINTERS

*Product is priced by the roll but must order by the case*

Quantity
Price: $18.75
Loading Updating cart…

EKRA Stencil Wiping Roll Aquavator™ – 400mm

EKRA Stencil Wiping Roll Aquavator™ – 400mm

NOVATECHTM 4000 fabric used in AQUAVATORTM EKRA stencil wiping rolls products is comprised of a synergistic blend of virgin rayon and polyester fibers.  Between these fibers is a water-active cleaning agent that will loosen and clean solder paste effectively from the bottom of stencils. These fibers are bonded with a proprietary polymeric resin.  Examination under a microscope shows the unique bonding characteristics of this super tough resin at the intersection of each fiber and is conducive to its low lint qualities. Looking at the cleaning surface under a microscope, it is evident that the irregular surface is conducive to the collection and entrapment of contamination.  While other smoother products simply push and smear, NOVATECHTM 4000 aggressively wipes, scoops and contains contamination.  As for its absorbency rate, NOVATECHTM 4000 readily accepts aqueous, alcohol and solvent based cleaning solutions. Because rayon is naturally absorbent, no soaps or surfactants that might leach out are added.  NOVATECHTM 4000 fabric is antistatic and the core is made of high impact pvc. The anti static properties decrease the threat of static sparks that may cause hazardous fires in the presence of flammable solvents.  These anti static properties also decrease the static attraction of dust and other contaminants and decreases the chance of static discharge onto solder traces and components on circuit boards.

Specifications:
Item: EKRA Stencil Wiper Roll
Quantity/Case: 25
Material Width: 400mm
Core Width: 400mm
Sold by: Roll
Item #: E-NT4-400

FOR E-3, E-4 and E-5 PRINTERS

*Product is priced by the roll but must order by the case*

Quantity
Price: $21.25
Loading Updating cart…

EKRA Stencil Wiping Roll Aquavator™ – 600mm

EKRA Stencil Wiping Roll Aquavator™ – 600mm

NOVATECHTM 4000 fabric used in AQUAVATORTM EKRA stencil wiping rolls products is comprised of a synergistic blend of virgin rayon and polyester fibers.  Between these fibers is a water-active cleaning agent that will loosen and clean solder paste effectively from the bottom of stencils. These fibers are bonded with a proprietary polymeric resin.  Examination under a microscope shows the unique bonding characteristics of this super tough resin at the intersection of each fiber and is conducive to its low lint qualities. Looking at the cleaning surface under a microscope, it is evident that the irregular surface is conducive to the collection and entrapment of contamination.  While other smoother products simply push and smear, NOVATECHTM 4000 aggressively wipes, scoops and contains contamination.  As for its absorbency rate, NOVATECHTM 4000 readily accepts aqueous, alcohol and solvent based cleaning solutions. Because rayon is naturally absorbent, no soaps or surfactants that might leach out are added.  NOVATECHTM 4000 fabric is antistatic and the core is made of high impact pvc. The anti static properties decrease the threat of static sparks that may cause hazardous fires in the presence of flammable solvents.  These anti static properties also decrease the static attraction of dust and other contaminants and decreases the chance of static discharge onto solder traces and components on circuit boards.

Specifications:
Item: EKRA Stencil Wiper Roll
Quantity/Case: 25
Material Width: 600mm
Core Width: 600mm
Sold by: Roll
Item #: E-NT4-600

FOR E-3, E-4 and E-5 PRINTERS

*Product is priced by the roll but must order by the case*

Quantity
Price: $28.75
Loading Updating cart…